The MRX Droplet Size Analyser delivers powerful capability to researchers in the food, medical, printing and chemical industries. Major applications include:

  • Analysis of the droplet size distributions of fat based emulsions including margarines / spreads, mayonnaise and food dressings
  • Analysis of droplet size distributions of inks
  • Analysis of droplet size distributions of paints
  • Analysis of droplet size distributions of lotions

Researchers can characterise droplet size behaviour over storage, logistics and end customer environmental conditions and well beyond. This is made possible by the variable temperature probe option allowing the analysis of samples at temperatures ranging from -100°C to +200°C.

Powerful bespoke capability

For advanced research, the MRX gives the researcher total freedom to design and control pulse sequences and filter settings, delivering powerful method development and advanced investigation capability. No other benchtop NMR spectrometer comes with such extensive capabilities.

The MRX Polymer Analyser comes with pulse programming software allowing the user to define their own radiofrequency pulse sequences and filter characteristics. The acquisition system allows up to 1MHz A/D sampling and the measurement of up to 128,000 echoes. Sets of measurements using different parameters can be sequenced without user intervention, using Active-XTM, from Excel, Matlab or similar packages.

Component Specification
System Includes electronics rack and magnet temperature controller

Packaged application for droplet size distribution analysis (package also available for diffusion analysis)

Unique RI-NMR software for real time interactive set-up, data acquisition and method development. Includes:

  • Pulse programmer
  • Visual Basic scripting with Active-XTM
  • Automatic routines for determination of T1, T2, gain, setting of frequency, 90°and 180° pulses
  • Probe tuning facility
  • WinFit and WinDXP software for extraction of multiple and distributed exponentials from data
  • Full data export capability to Excel, Matlab and similar user installed packages
  • Pulse programmer
  • Acquisition with up to 1MHz A/D
  • Pre-amplifier optimised for low frequency operation
  • Up to 128,000 echoes
  • 0.55T ±10% (23MHz 1H resonance) rare earth magnet
  • 35mm air gap allowing samples up to 26mm in diameter to be measured
  • Thermally stabilised at 40°C
Magnetic field drift <500Hz in 24 hours in an air conditioned room which is thermally stabilised to ±2°C
Probes 10mm, 18mm and 26mm operating at 40°C
Variable temperature

10mm and 18mm probe with gas-controlled variable temperature operating from -100°C to +200°C (-50°C to +150°C is the basic configuration)

Probe dead time

Dependent on Q of probe and filter characteristics but typically:

  • <10ms for 10mm probe
  • <16ms for 18mm probe
  • <30ms for 26mm probe
RF amplifier 250W Tomco
P90 pulse duration

Dependent on probe configuration but typically:

  • 3ms for 10mm probe
  • 4ms for 18mm probe
  • 5ms for 26mm probe
Pulse field gradients

One dimensional, probe mounted pulsed field gradient coils

Gradient 250Gcm-1

Includes bipolar power supply and mains trigger to synchronise gradient pulses with mains electricity cycles
Gradient rise time <500ms (10% - 90%) without the use of pre-emphasis
Gradient protection Thermal (over temperature protection) and fused (instantaneous energy protection)